Molex Micro-Fit Series: Urgent Sourcing and Selection Guide (Shenzhen Dispatch)

Who this page is for

This page is written for overseas buyers, commodity managers, and hardware engineers who need Molex Micro-Fit connectors when catalog lead times are too long, a production line is waiting, or a last-time or hard-to-find manufacturer part number (MPN) has to be confirmed before a purchase order.

AICOXIN is a Shenzhen–Hong Kong independent distributor of electronic components. We work in RFQ mode only: this website does not publish prices or live stock counts. Shenzhen same-day dispatch, DHL/FedEx, and original-part incoming inspection are available after the part number and quantity are checked.

Use this page when a Micro-Fit requirement is already on a bill of materials (BOM), a drawing, or an approved AVL. If no MPN has been chosen yet, this page is not a design-in guide; start with the official Molex documentation and your own engineering review.

What this page covers

This guide covers the procurement and selection workflow for the Molex Micro-Fit series. It does not replace the manufacturer’s current datasheet.

Any electrical ratings, pin counts, housing styles, wire gauges, operating temperature, or mating combinations must be taken from the official Molex datasheet and confirmed by AICOXIN’s business supervisor and engineer before they are published or used in a quote. Specification tables are withheld here until that check is complete.

This page does not present AICOXIN as the official Molex authorized distributor. AICOXIN is an independent distributor and channel. It does not list inventory quantities, does not state a cutoff time for same-day dispatch after confirmation, and does not recommend a pin-to-pin substitute.

Typical application context (not a design recommendation)

The following context is typical buyer language only. It is not a design recommendation, and it is not a substitute for the current datasheet or for your own engineering approval.

Buyers typically request Micro-Fit parts for compact board-to-wire or wire-to-wire interconnects in industrial electronics, power supplies, control boards, and similar equipment where a smaller power or signal connector than Mini-Fit Jr. is already on the BOM. That comparison describes how the series often appears in purchasing files. It is not a statement of current, voltage, pitch, or pin count, and it is not advice to change a design from one family to another.

A BOM may list a housing, a header, and terminals as separate Micro-Fit MPNs. Those part numbers are not interchangeable. A nickname, a stock code, or a description such as “Micro-Fit housing” is not sufficient on its own. If your file lists a different Molex family, use the matching guide: Mini-Fit Jr. 5557/5559, MX150 / MX123, Easy-On 0.30mm FPC, DuraClik 2.00mm, or MicroClasp 2.00mm. Those pages are navigation only. They are not approved-alternate lists. A series hub is also available: Molex interconnect series urgent sourcing guides.

How to specify the exact MPN for an RFQ

A usable RFQ starts with the full manufacturer part number taken from the BOM or the drawing, including any suffix or packaging code already shown in your file. Please also include the quantity, the target date, the ship-to country, and any date-code or packaging notes the buyer already has.

If the only reference available is a series nickname, an internal stock code that cannot be tied to an MPN, or an unstated substitute, the request should go back to engineering before a purchase order is placed. AICOXIN will not invent a replacement MPN, and a formal quote should not treat an unconfirmed alternative as approved.

When several Micro-Fit items belong to the same assembly, list each MPN on its own line with its own quantity. Do not ask AICOXIN to complete a mating set from memory. Optional companion industrial or power devices, such as Texas Instruments, ST, or Infineon MPNs that appear on the same BOM, may be included in the same RFQ as exact customer part numbers. They are not alternates to Molex connectors, and no chip MPNs are suggested here.

Lead time, shortage, and Shenzhen dispatch

Catalog lead times for interconnects can be long, and a published catalog date is not a confirmed delivery promise for a specific quantity. AICOXIN can check urgent and scarce Micro-Fit MPNs against current availability. After the part number and quantity are checked and availability is confirmed, AICOXIN can support Shenzhen same-day dispatch and shipment by DHL or FedEx.

This page does not promise a cutoff time, a stock quantity, or that every Micro-Fit MPN is on the shelf. Same-day dispatch is offered only after confirmation, and the same-day dispatch clock starts only after that confirmation is complete.

MPNs that appear scarce, constrained, or possibly obsolete can be sourced globally after the part number is confirmed. Global sourcing is an availability search, not a guarantee that a given MPN will be found, and it does not authorize an unapproved alternative.

Original-part incoming inspection

AICOXIN performs original-part incoming inspection on parts supplied against a confirmed RFQ. This page does not publish an inspection procedure, laboratory names, or certificate titles. Buyers may ask which quality documents can be provided; that question is handled at RFQ time. Inspection is a receiving control. It does not replace the manufacturer’s datasheet or the buyer’s own incoming quality process.

RFQ checklist

Please include the following in a Micro-Fit request. Do not expect a public price or a published stock quantity in return.

  • Full Molex MPN (and any required manufacturing or packaging code the buyer already has)
  • Quantity and target date
  • Ship-to country and preferred courier if the buyer has one
  • Whether the line is waiting, in shortage, or a last-time buy, as the buyer describes it, not as a sales label
  • Companion industrial or power MPNs (for example, Texas Instruments, ST, or Infineon) only as exact customer MPNs, optional
  • A request for datasheet confirmation and an availability check before quote

A concise request template

Buyers can send the MPN, quantity, and target date through an RFQ on aicoxin.com/ or via WhatsApp, Telegram, or Microsoft Teams. A formal quote should follow only after datasheet and availability checks. Until that review is complete, no specification, stock quantity, or alternative part number should be treated as final.

A short message in the following form is enough to start the review:

Subject: RFQ — Molex Micro-Fit [MPN]

Hello,

Please check availability and lead time for the following requirement:

  • Manufacturer: Molex
  • Full MPN: [MPN]
  • Quantity: [quantity]
  • Target date: [target date]
  • Ship-to country: [country]
  • Preferred courier (optional): [DHL / FedEx / other]
  • Line status (optional): [waiting / shortage / last-time buy, as applicable]
  • Companion MPNs to include in the same RFQ (optional; exact customer MPNs only): [MPN]

Please confirm this MPN against the current official datasheet and check availability before issuing a quote. I understand that Shenzhen same-day dispatch, if offered, applies only after availability is confirmed.

Thank you.

Boundary statement: Any electrical parameter, package detail, inventory quantity, or pin-to-pin replacement mentioned in connection with the Molex Micro-Fit series must be confirmed by AICOXIN’s business supervisor and engineer against the current datasheet before it is published or quoted.


Shopping Cart